Usb File Transfer - Raven ENVIZIO PRO Installation And Operation Manual

Multi-function field computer for growers
Table of Contents

Advertisement

USB File Transfer

Memory within the field computer is used to store current job and application information. Application
information for past jobs should be periodically transferred to a USB flash drive and copied to a home or office
PC to view and more permanently store this information. Use a USB flash drive with at least 512 MB of
memory (maximum 4 GB) for transferring these files. Storage devices may be purchased at many retail
locations or a local Raven dealer.
4 GB USB Flash Drive (P/N 524-0002-065)
FIGURE 3.
Note:
Install the USB flash drive only when transferring files. Do not start the field computer with a flash
drive connected or leave the drive inserted during normal operation.
For additional information on the available memory resources on specific consoles, refer to the
Technical Specifications section on page 12.
P/N 016-0171-493 Rev. I
CAUTION
Damage to the field computer may occur if the
USB ports are used to charge mobile devices
such as cellular phones, tablets, or mp3
devices. The USB ports should only be used for
performing file transfer and maintenance.
Introduction
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envizio pro ii

Table of Contents