Drawing; Accessories; Location Identification Plate - Vermeiren eclips X4 Instruction Manual

The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-16: Resistance to ignition of upholstered parts
ISO 7176-19: Wheeled mobility devices for use as seats in motor vehicles. (shall be only for
Eclips X4 wheelchair)
1.3

Drawing

1.4

Accessories

The following accessories are available for the Eclips X4, Eclips X4 30° :
•
Anterior pelvic belt (B58) for mounting on the tubes of the back
•
Anti-tipping device (B78) for mounting on the bottom frame
•
Arm supports (B02, B03, B05, B66)
•
Footrests (B06, BZ8, BZ7)
•
B52 Serum holder
•
B74 Drum brakes
•
T30 Transit wheelchair
Contact your specialist dealer about other accessories. He will gladly advise you.
1.5

Location identification plate

1 = Cross
2 = Handles
3 = Backrest
4 = Arm pads
5 = Arm supports
6 = Driving wheels (rear wheels)
7 = Hand rims
8 = Brakes
9 = Steering wheels (Front wheels)
10 = Seat
11 = Tip cap
12 = Footrests
13 = Footplate
1 = Vermeiren name
2 = Taxi hooks
3 = Identification plate
4 = Name Eclips X4
Page 6
Eclips X4, Eclips X4 30°
2012-01