Maintenance; Regular Maintenance - Vermeiren eclips X4 Instruction Manual

Some of the wheelchairs are made with an adjustable axle adjuster. With these adjuster you
can also change the stability and the manoeuvrability of your wheelchair.
1
4

Maintenance

Lifetime of the wheelchair is influenced by its use, storage, regular maintenance, servicing
and cleaning.
4.1

Regular Maintenance

The maintenance activities to ensure a good condition for your Vermeiren wheelchair are
described below:
•
Before every ride
Check the tyres and make them clean. If necessary change the tire.
Check screw fastenings are secured.
Check the brakes and adjusted if necessary.
Check the wheelchair (cleanliness, cracks, damage on structural parts ... .)
and make it clean. If necessary change the coating.
•
Every 8 weeks: inspection and possibly lubricating or adjusting from
Arm supports
Footrests
Brake lever
Wheel axles
Back adjusting system (For Eclips X4 30° )
•
Every 6 months or for every new user
General review
Disinfection
Frontwheels, possibly clean bearings
For your convenience, on the back of this manual is a maintenance plan.
Repairing and assembling of spare parts for your wheelchair may only be performed by the
specialist dealer.
Only authorized Vermeiren spare parts may be installed.
1. Remove the screws
2. Push/Pull the adjustable axle adjuster
upwards or downwards to the required
height or mount the rear wheel in another
2
axle mounting
3. Retighten the screws
4. Adjust the brakes.
Please note that your wheelchair might
become tipping over. To prevent this, you can
also mount an anti-tipping device.
3
Page 24
Eclips X4, Eclips X4 30°
2012-01
and .
.
and .