Setting Call Charges - Siemens Gigaset 4010 Classic Operating Instructions Manual

Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619
Press keys:

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
CALL CHARGES

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
SETTINGS
LLL1
e. g.

Setting call charges

If you want to call charges to be displayed, you must re-
quest the call charge pulse transmission from your net-
work provider. Units are displayed automatically. You
can set call charges per unit and the currency by your-
self.
If the call charge pulses are not transmitted, the hand-
set automatically displays the current call duration.
Setting call charges per unit and currency
If you want the the call charges to be displayed as a
sum of money , you must set the call charges per unit
with the relevant currency.
NNNNNNNNNNNN
Open the menu.
MENU

Select the menu item and confirm.

Select the menu item and confirm.
"RATE ,"
Enter call charges per unit (for example: 2 pence).
NNNNNNN

Confirm input.
CURRENCY
Enter the letters for the currency abbreviation, e.g.
GBP (for information on entering letters and characters,
see page 18).
 NNNNNNN
Confirm input.
¬
If you set the call charges per unit to zero, the
units are displayed instead of the call charges.
kosten.fm
Making cost-effective calls
is displayed:
is displayed:
11.06.01
33