General Specifications - Fluke 5500A Getting Started

5500A
Getting Started

General Specifications

Warmup Time
Settling Time
Internal Diagnostics
Standard Interfaces
Temperature Performance
Electromagnetic
Compatibility
Temperature Coefficient
Relative Humidity
Altitude
Safety
Analog Low Isolation
EMI/RFI
Line Power
Power Consumption
Dimensions
Weight
12
Twice the time since last warmed up, to a maximum of 30 minutes
5 seconds typical for all functions and ranges
Comprehensive analog and digital self-tests on demand. Self-tests are
valid after warm-up time.
IEEE-488 (GPIB), RS-232, 5725A Amplifier
Operating: 0°C to 50°C
Calibration (tcal): 15°C to 35°C
Storage: -20°C to 70°C
Designed to operate in Standard Laboratory environments where the
Electromagnetic environment is highly controlled. If used in areas with
Electromagnetic fields of 1 to 3 V/m, resistance outputs have a floor
adder of 0.508 Ω. Performance not specified above 3 V/m.
Temperature Coefficient for temperatures outside tcal +5°C is 0.1X/°C of
the 90-day specification (or 1-year, as applicable).
Operating: <80% to 30°C, <70% to 40°C,<40% to 50°C
Storage: <95%, noncondensing
Operating: 3,050 m (10,000 ft) maximum
Nonoperating: 12,200 m (40,000 ft) maximum
Designed to comply with IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994;
CAN/CSA-C22.2 No. 1010.1-92
20V
Designed to comply with FCC Rules Part 15; VFG 243/1991
Line Voltage (selectable): 100 V, 120 V, 220 V, 240 V
Line Frequency: 47 to 63 Hz
Line Voltage Variation: +10% about line voltage setting
5500A Calibrator, 300 VA; 5725A Amplifier, 750 VA
5500A Calibrator:
Height, 17.8 cm (7 inches), standard rack increment, plus 1.5 cm
(0.6 inch) for feet on bottom of unit;
Width, 43.2 cm (17 inches), standard rack width
Depth, 47.3 cm (18.6 inches) overall.
5725A Amplifier:
Height, 13.3 cm (5.25 inches)
Width, 43.2 cm (17 inches), standard rack width
Depth, 63.0 cm (24.8 inches) overall.
5500A Calibrator:
20 kg (44 pounds)
5725A Amplifier:
32 kg (70 pounds)