Table of Contents
Advertisement
5500A Getting Started Manual
This 5500A Getting Started Manual contains a brief introduction to the 5500A Manual
Set, instructions on how to get your calibrator prepared for operation and a complete set
of specifications.
5500A Operator Manual
The 5500A Operator Manual provides complete information for installing the 5500A
Calibrator and operating it from the front panel keys and in remote configurations. This
manual also provides a glossary of calibration, specifications, and error code
information. The Operator Manual includes the following topics:
•
Installation
•
Operating controls and features, including front panel operation
•
Remote operation (IEEE-488 bus or serial port remote control)
•
Serial port operation (printing, displaying, or transferring data, and setting up for
serial port remote control)
•
Operator maintenance, including verification procedures and calibration approach
for the 5500A
•
Oscilloscope Calibration Option
•
Accessories
5500A Operator Reference Guide
The 5500A Operator Reference Guide contains a summary of operating instructions, and
a front panel and rear panel feature reference. This guide is included with this manual.
5500A Programmer Reference Guide
The 5500A Programmer Reference Guide contains a summary of remote commands and
reference information useful in determining system status using the status byte and
related registers. This guide is included with this manual.
5500A Service Manual
The 5500A Service Manual is available in PDF format on the CD-ROM provided with
your instrument. It can also be ordered through your local Fluke Sales or Service
representative. The 5500A Service Manual includes: theory of operation, performance
testing, maintenance, calibration, troubleshooting, parts lists, and schematic diagrams.
Where to Go from Here
To locate specific information concerning the operation of the 5500A calibrator, refer to
the following list:
•
Controls, indicators, and displays: Operator Manual - Chapter 3, "Features"
•
Front panel operation: Operator Manual - Chapter 4, "Front Panel Operation"
•
Cabling to a UUT (Unit Under Test): Operator Manual - Chapter 4, "Front Panel
Operation"
•
Using the auxiliary amplifier: Operator Manual - Chapter 4, "Front Panel
Operation"
•
Remote operation (IEEE-488 or serial): Operator Manual - Chapter 5, "Remote
Operation"
•
Calibrating an Oscilloscope: Operator Manual - Chapter 8, "Oscilloscope
Calibration Option"
•
Accessories to the 5500A Calibrator: Operator Manual - Chapter 9, "Accessories"
Multi-Product Calibrator
Where to Go from Here
3
Advertisement
Table of Contents
