Alarm Module (Optional) - E+E Elektronik EE31 User Manual

5. MEASURED VALUES:
The dominant value of the appropriate quantity is displayed in this field. For the factory
configuration, the measured values may fall between the measurement ranges shown below.
Humidity
Temperature
Dew-point temperature
Frost-point temperature
Wet-bulb temperature
Water vapour partial pressure e
Mixture ratio
Absolute humidity
Specific enthalpy
The measurement ranges indicated above can be set to individual requirements using the
configuration software supplied (see Configuration software, chapter 5 "Index - Index Cards").
6. STATUS LINE:
- MIN; MAX: see Point "MIN/MAX Function", see Hardware, chapter
- CALIB LOW; CALIB HIGH: indicates the low or high humidity/temperature calibration point.
- REL1 / REL2: Status Relay
- "ERROR 01....04": see Hardware, chapter
6.

ALARM MODULE (optional)

The optional alarm module can be used for alarm and error issues and other simple control
functions. This module can be configured using the configuration software supplied.
The user thus has the option of setting the measurand to be monitored (RH, T, Td,...) and the
threshold hysteresis for each relay. (For the procedure, see the Configuration sofware, chapter 5.2
"Relay")
max. switched voltage / max. switched current: 250 VAC / 6A
Minimum load:
Switching relay 1:
REL1
RH: 63.0%
If relay 1 has tripped (ON),
then REL1 is displayed.
Switching relay 2:
REL2
RH: 63.0%
If relay 2 has tripped (ON),
then REL2 is displayed.
from up to
RH 0
T -40
(-40)
Td -80
(-112)
Tf -80
(-112)
Tw 0
(32)
0
(0)
r 0
(0)
dv 0
(0)
h 0
(0)
11
NC
EIN
12
C
ON
13 NO
11 NC
AUS
12
C
OFF
13 NO
14
NC
EIN
15
C
ON
16 NO
14 NC
AUS
15
C
OFF
NO
16
11
EE31-A,F EE31-B
100 100
60 80
(140) (176)
60 80
(140) (176)
0 0
(32) (32)
60 80
(140) (176)
200 500
(3) (7.5)
425 999
(2900) (9999)
150 300
(60) (120)
400 1000
(50000) (375000)
8.3 "Self-diagnosis and error messages
28 VDC / 6A
>100mA / 12V
Ausschaltpunkt
switching off Hysterese
8%
62 70
Ausschaltpunkt
switching off Hysterese
8%
Einschaltpunkt
switching on
62 70
units
EE31-D,E
100 % RH
180 degC
(356)
100 degC
(212)
0 degC
(32)
100 degC
(212)
1100 mbar
(15)
999 g/kg
(9999)
700 g/m
(300)
2800 kJ/kg
(999999)
5.2 "Display module"
"
Einschaltpunkt
switching on
[%,°C,kj/kg,
g/kg,g/m³,mbar,...]
Schaltpunkt
switching point
[%,°C,kj/kg,
g/kg,g/m³,mbar,...]
Schaltpunkt
switching point
Hardware
(°F)
(°F)
(°F)
(°F)
(psi)
(gr/lb)
(gr/f 3) )
3
(lbf/lb)