Technical Specifications - Beurer BM 49 Instructions For Use Manual

In such cases, repeat the measurement. Ensure that you do not move or speak.
If necessary, reinsert or replace the batteries.
9. Cleaning and storing the unit
• Clean your blood pressure monitor carefully using a slightly damp cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances should you hold the unit under water, as this can cause liquid to enter and
damage the unit.
• If you store the unit, no heavy objects should be placed on top of it. Remove the batteries. The cuff line
should not be bent sharply.

10. Technical specifications

Model no.
Measurement method
Measurement range
Display accuracy
Measurement inaccuracy
Memory
Dimensions
Weight
Cuff size
Permissible operating conditions +10 °C to +40 °C, ≤ 85 % relative air humidity (non-condensing)
Permissible storage conditions
Power supply
Battery life
Accessories
Classification
Technical information is subject to change without notification to allow for updates.
• This unit is in line with European Standard EN 60601-1-2 and is subject to particular precautions with
regard to electromagnetic compatibility (EMC). Please note that portable and mobile HF communication
systems may interfere with this unit. More details can be requested from the stated Customer Service
address or found at the end of the instructions for use.
• This device is in line with the EU Medical Devices Directive 93/42/EEC, the „Medizinproduktegesetz"
(German Medical Devices Act) and the standards EN 1060-1 (non-invasive sphygmomanometers,
Part 1: General requirements), EN 1060-3 (non-invasive sphygmomanometers, Part 3: Supplementary
requirements for electro-mechanical blood pressure measuring systems) and IEC 80601-2-30 (Medical
electrical equipment – Part 2 – 30: Particular requirements for the safety and essential performance of
automated non-invasive blood pressure monitors).
BM 49
Oscillometric, non-invasive blood pressure measurement on the upper
arm
Cuff pressure 0 – 300 mmHg, systolic 50-250 mmHg,
diastolic 30-200 mmHg, Pulse 30 –180 beats/minute
Systolic ± 3 mmHg, diastolic ± 3 mmHg, pulse ± 5 % of the value shown
Max. permissible standard deviation according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
2 x 60 memory spaces
L 145 mm x W 96 mm x H 60 mm
Approx. 264 g (without batteries)
22 to 36 cm
-20 °C to +50 °C, ≤ 85 % relative air humidity, 800 –1050 hPa ambient
pressure
4 x 1,5 V AA batteries
For approx. 250 measurements, depending on the blood pressure level
and/or pump pressure
Instruction for use, 4 x 1.5 V AA batteries, storage pouch
Internal supply, IPX0, no AP or APG, continuous operation, type BF
applied part
11