Disposal; Technical Specifications - Beurer BM 53 Instructions For Use Manual

Error Possible
message cause
The inflation
pressure is
higher than
300 mmHg.
There is a
system error.
The batteries
are nearly flat.

10. DISPOSAL

Repairing and disposing of the device
• Do not repair or modify the device yourself. Proper oper-
ation can no longer be guaranteed in this case.
• Do not open the device except for the battery compart-
ment. Failure to comply will invalidate the warranty.
• Repairs must only be carried out by Customer Services
or authorised retailers. Before making a complaint, first
check the batteries and replace them if necessary.
Solution
Please take another meas-
urement to check whether
the cuff can be correctly
inflated. Make sure that
neither your arm nor other
heavy objects are pressing
on the line, and that the line
is not bent.
If this error message
appears, please contact
Customer Services.
Insert new batteries into the
device.
• The device must not be disposed of with household
waste. Dispose of the device at a suitable local
collection or recycling point in your country. Dis-
pose of the device in accordance with EC Direc-
tive – WEEE (Waste Electrical and Electronic
Equipment). Please contact the local authorities respon-
sible for waste disposal if you have any questions regard-
ing disposal.
Disposal of the batteries
• Used, completely discharged batteries must not be dis-
posed of with household waste. Dispose of the batter-
ies in specially designated collection boxes, at recycling
points or at electronics retailers. You are legally required
to dispose of the batteries correctly.
• The codes below are printed on batteries containing
harmful substances:
- Pb = battery contains lead
- Cd = battery contains cadmium
- Hg = battery contains mercury

11. TECHNICAL SPECIFICATIONS

Type BM 53
Meas- Oscillometric, non-invasive blood pressure
urement measurement on the upper arm
method
39