Beurer BM 49 Instructions For Use

Machine Translated by Google
Beurer BM 49 - Blood pressure monitor
Instructions for use
Dear customers,
Thank you for choosing our products. Our name is synonymous with high quality, thoroughly tested products for use in the areas of energy consumption, body temperature, heart
rate, gentle manual therapy, massage and air therapy. Please read this manual carefully and keep it for future reference, make sure it is available to other users and follow the
instructions. Sincerely, Your Beurer Team
1. Introduction
Check that the Beurer BM 49 blood pressure monitor is stored in an undamaged packaging and that the contents are complete. Prior to use, make sure that the appliance and
its accessories are not visibly damaged and that all packaging has been removed. If in doubt, do not use the appliance and contact your dealer or service center. The addresses of
the service centers are given in the manual. The blood pressure meter on the arm is used for non-invasive measurement and control of arterial blood pressure values of adults. With
its help you can quickly and easily measure your blood pressure, save the measured values and have the course and average of the measured values displayed.
You will be warned if you have any heart rhythm problems. The determined values are classified and graphically assessed according to WHO guidelines. Keep these operating
instructions for future reference and make them available to other users.
2. Important instructions
Explanation of symbols
The following symbols are used in the operating instructions, on the packaging and on the nameplate of the device and accessories:
Attention
Notice
Warning of important information
Follow the instructions for use
Part for the use of type BF
Direct current Disposal
according to EC directive on old electrical and electronic
equipment 2002/96 / EC -
WEEE (Waste Electrical and Electronic Equipment).
Instructions for use
• Always measure your blood pressure at the same time each day so that the values can be compared correctly.
• Rest for about 5 minutes before each measurement!
• If you want to perform several measurements on one person, then take a 5-minute break between each measurement.
• You should not eat or drink, smoke or exercise for at least 30 minutes before measuring.
• In case of uncertainty for the measured values, repeat the measurement.
• The values measured by you can only serve for your information, they do not replace a medical examination! Discuss the measured values with your doctor, in no case make
your own medical decisions (eg medicines and their dosage) from the results!
• Do not use the blood pressure monitor in newborns and patients with preeclampsia. We recommend consulting a doctor before using a blood pressure monitor during pregnancy.
• In the case of cardiovascular disease, incorrect measurements could occur, or to adversely affect the accuracy of the measurement. This also happens with very low blood
pressure, diabetes, circulatory and rhythm disorders, as well as chills or chills.
• The blood pressure monitor must not be used in conjunction with a high-frequency surgical device.
• Only use the device with people with an arm circumference suitable for this device.
• Be aware that the function of the limb in question may be adversely affected during inflation.
• Blood circulation must not be suppressed unnecessarily long when measuring blood pressure. In the event of a malfunction of the device, remove the cuff from the arm.
• Avoid mechanical squeezing, compression or kinking of the cuff hose.
• Avoid constant cuff pressure and frequent measurements. The resulting restriction of blood flow can lead to damage.
• Make sure that the cuff is not placed on the arm whose arteries or veins are undergoing treatment, such as intravascular intervention, or intravascular therapy or arteriovenous
shunt (AV-).
• Do not attach the cuff to people who have undergone breast amputation.
• Do not apply the cuff to wounds that could cause further injury.
• You can use the blood pressure monitor with batteries or an AC adapter. Note that data transfer and storage is only possible if the blood pressure meter is powered. As soon as
the batteries are empty or the mains supply is disconnected from the mains, the blood pressure meter loses the date and time.
• Auto Power Off turns off the blood pressure meter to save battery power if no button is pressed for 1 minute.
• The device may only be used for the purpose stated in these operating instructions. The manufacturer is not liable for damage caused by incorrect or incorrect use.
Storage and care instructions
• The blood pressure meter consists of precise and electronic components. The accuracy of the measured values and the service life of the device depend on careful
handling:
- Protect the device from shocks, humidity, dirt, strong temperature fluctuations and direct sunlight.
- The device must not fall on you.
- Do not use the device near strong electromagnetic fields, keep it away from radio equipment or mobile phones.
- Use only the supplied or original spare cuffs. Otherwise, incorrect values will be measured.
• Do not press the buttons unless the cuff is attached.
• We recommend that you remove the batteries if you will not be using the device for a long time.
Repair and disposal instructions
• Batteries do not belong in the household waste. Please dispose of used batteries at designated collection points.
• Do not open the device. Failure to do so will void the warranty.
• Do not repair or adjust the device yourself. In this case, perfect function is no longer ensured.
• Repairs may only be performed by customer service or authorized dealers. Before each complaint, first check the batteries and replace them if necessary.
• Dispose of the device in accordance with the EU Waste Electrical and Electronic Equipment (WEEE) Directive.
In case of feedback, please contact the municipal disposal office.
Producer
Permissible temperature and humidity during storage
Permissible operating temperature and humidity
Protect from moisture
Serial number
The CE mark confirms compliance with the essential requirements
of Directive 93/42 / EEC for medical devices.