Pro-face GP-2300T Manual page 59

NOTE
・ To see how the tags or the parts of GP-PRO/PBIII for Windows are replaced
on GP-Pro EX, refer to [OtasukePro!] (http://www.pro-face.com/)
"Feature Comparison between GP-PRO/PBIII and GP-Pro EX"
(http://www.pro-face.com/otasuke/qa/gp3000/replace/soft/conv/care/3/co
mpare.htm)
・ To check each function setting of GP-Pro EX, refer to GP-Pro EX Reference
Manual.
2. Check and change the destination folder setting following the steps below.
i. Click [Project]->[Information]->[Destination Folder].
ii. The current setting is displayed.
iii. After changing it, click [OK] to confirm the setting.
iv. Click [Project]->[Save] to save changes.
59/59