Set Temperature Alerts; Arm/Disarm Temperature Alerts - La Crosse 308-1711BL Instructional Manual

Tip: Setting the alerts is one step. Arming the alerts is a separate step (see below)
1. Hold the TEMP ALERTS button until the station beeps.
2. The temperature alert value will blink in set mode.
3. Press the ▼ or ▲ buttons to adjust the values.
4. Press the TEMP ALERTS button to confirm & move to the next alert.
OUTDOOR HIGH
1. Press and release the TEMP ALERTS button so the outdoor HI alert temperature shows and the word HI
flashes.
• Press UP ARROW to arm alert
• Press DOWN ARROW to disarm alert
2. Press and release the TEMP ALERTS button to confirm and move to the outdoor LO, indoor HI and indoor
LO alerts.
3. A bell appears above and alert when armed.
4. If no alerts are active, OFF will show.
OUTDOOR HI & LO ALERTS ARMED
All MIN/MAX temperature/humidity records will reset automatically at 12:00 (midnight).
• Press and release the DOWN ARROW to view indoor/remote minimum readings.
• Press and release the UP ARROW to view indoor/remote maximum readings.
Wireless Weather Station

Set Temperature Alerts

OUTDOOR LOW

Arm/Disarm Temperature Alerts

MIN/MAX Temperature Records
INDOOR HIGH
ALL ALERTS DISARMED
INDOOR LOW
Page | 6