6.4 Log Settings
You can set the maximum number of logs that can be displayed and configure the log
server settings.
To configure the log server:
1)
Click Add to add a log server.
2)
Specify the IP address and port of the syslog server on your LAN and enable the log
server.
3)
Check the "To use the following rules, you must check this box." option.
If configured successfully, the system will begin to log events and simultaneously send
them to the specified log server on your LAN. You can view all logs there.
6.5 Backup & Restore
Once you have configured the device the way you want it, you can save these settings to
a configuration file on your local hard drive that can later be imported to your device in
case that the device is restored to factory default settings.
30