Method 1: To restore factory default using UI: Click the Restore to Factory Default
button and wait until the progress indicator displays 100% completed.
Method 2: To restore factory default by pressing the hardware reset button:
1)
Remove the cover of the device.
2)
Press the Reset button with a needle for about 7 seconds.
Factory Default Settings are listed below:
Default User Name: admin
Default Password: admin
Default LAN IP Address: 192.168.0. 254. This IP address is to be used to access the
device's settings through a web browser.hg
Default LAN Subnet Mask: 255.255.255.0
Tip
1)
The action of "restore factory default" removes all your configurations from the device.
So if you want to keep your configurations, do not perform this action.
2)
Do not restore factory default settings unless the following happens:
You need to join a different network or unfortunately forget the login password.
You cannot access the Internet and Tenda technical staff asks you to reset the router.
6.7 User Name & Password
Here you can change the user name and password for web login. We suggest that you
32