How to Log in to Web UI in a More Secure Way
This function enables you to log in to its web UI in a more secure way.
Configuration Steps:
❶
Click Advanced > Network Service and locate the HTTP web service feature.
❷
Check the Enable box to enable HTTP web service feature.
❸
Enter the HTTP web service port. By default, it is port 80.
❹
Click Save at the bottom of this page to apply your changes.
❺
Then you need to enter "http://login IP address: port No." in the address bar to log in to its
web UI. Here we enter "http://192.168.2.1:80" in the address bar.
How to Configure the Idle Timeout
You are automatically logged out of the web UI after a period of inactivity. You can set the length
of the inactive period. To change the page idle timeout, click Advanced > Network Service,
locate the Page Timeout field, set the page timeout you wish to (Range: 1~60 minutes) and click
Save.
42
3 Advanced Settings