Advanced Settings - Tenda teg2124t User Manual

Extension Channel: This is used to ensure N speeds for 802.11n devices on the network.
This option is available in 11b/g/n mixed mode with channel bandwidth of 20/40.
WMM-Capable: WMM is QoS for your wireless network. Enabling this option may better
stream wireless multimedia data (such as video or audio).
ASPD Capable: Auto power saving mode. This option is effective only if WMM is enabled.
It is advisable to keep it disabled.

4.3 Advanced Settings

Here you can configure the advanced wireless settings including AP Isolation, Beacon
interval, Fragment threshold, RTS threshold and DTIM interval, etc, for your wireless
networks. Normally, the default settings will work. If not, change them according to the
suggestions given by your ISP or our technical staff. Click Wireless -> Advanced to enter
the configuration interface.
Note
Only change the default settings if instructed by your ISP or our technical staff. Wrong
configurations may degrade your wireless performance.
Beacon Interval: A time interval between any two consecutive Beacon packets sent by an
Access Point to synchronize a wireless network. The valid value range is between
21