Dhcp Client List; Wireless Settings - Tenda teg2124t User Manual

Wireless n300 wall plate access point

Hide thumbs Also See for teg2124t:

Table of Contents

pages may not be open.

Note

If there is already an active DHCP server on your network, make sure the IP address pool

you specified here is not a part of that existing DHCP server. Otherwise, IP collisions may

occur.

3.2 DHCP Client List

Click DHCP Server -> DHCP Client List to enter the DHCP clients screen. Here you can

view the host name, IP address, MAC address, and lease time information.

This section describes the following.

4.1 Basic

Settings: Here you can configure the basic wireless settings of the device such

as the SSID (name of the network) and broadcast SSID, etc.

4.2

Radio: Here you can configure basic wireless settings including network mode and

channel, etc.

4.3 Advanced

Settings: Here you can configure advanced wireless settings. This is only

recommended to advanced users.

4.4 Access

Control: Specify a list of devices to allow or disallow a connection to your

wireless network via the device's MAC addresses.

4.5

QVLAN: Here you can configure the QVLAN feature to better manage wireless traffic

and enhance wireless security.

Table of Contents