Table of Contents
Advertisement
Instruction Manual TWL54A Access Point
Chapter 3 Configuration
Now that you've connected the AP to your wired network,you are ready to
begin setting it up.This chapter will take you through all the steps necessary
to configure your AP.
3.1 Log in
Launch Internet Explorer or Netscape Navigator,In the Address field, enter
the AP's default IP address,192.168.0.254,Press Enter key, the login screen
will appear.Before do this,you need set your PC's IP address is
192.168.0.x(x is any one value of 1-253),and subnet mask is
255.255.255.0.(Please refer to the Appendix II for the detail of TCP/IP
setting)
Enter admin in the user name field,password is admin when this is your
first time open the Web-based management interface.(You can set a new
password from the System Tool – Change password tab)
Click Ok, the welcome screen will appear;
5
Advertisement
Table of Contents
