Optical Drive - HP 242 G2 Maintenance And Service Manual

Optical drive

All optical drive spare part kits contain a bezel and bracket.
Description
DVD±RW Double-Layer with SuperMulti Drive
Before removing the optical drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the memory module service cover (see
Remove the optical drive:
1. Remove the Phillips PM2.5×4.5 screw (1) that secures the optical drive to the computer.
2. Push the optical drive tab (2) to release the optical drive from the computer.
42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 33).
Memory module on page
Spare part number
728285-001
40).