Processor - HP 242 G2 Maintenance And Service Manual

Processor

NOTE: The processor spare part kit includes replacement thermal material.
Description
Intel Core i7-4600M 2.90-GHz processor, 4.0-MB L3 cache, 37 W
Intel Core i5-4200M processor (2.50-GHz, 3-MB L3 cache, 37 W)
Intel Core i3-4100M processor (2.50-GHz, 3-MB L3 cache, 37 W)
Intel Core i3-4000M processor (2.40-GHz, 3-MB L3 cache, 37 W)
Intel Pentium 3550M processor (2.40-GHz, 2-MB L3 cache, 35 W)
Intel Celeron 2950M processor (2.0-GHz, 2-MB L3 cache, 35 W)
Before removing the processor, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. WLAN module (see
c. Solid-state drive (see
d. Memory module service cover (see
e. Optical drive (see
f. Keyboard (see
g. Top cover (see
h. Fan (see
i. System board (see
j. Heat sink (see
Remove the processor:
1. Turn the system board upside down, with the front toward you.
2. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn counterclockwise
(2), until you hear a click.
66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Hard drive on page
WLAN module on page
mSATA drive on page
Optical drive on page
Keyboard on page 46)
Top cover on page
Fan on page 56)
System board on page
Heat sink on page 63)
33) and then remove the following components:
34)
37)
39)
Memory module on page
42)
49)
59)
Spare part number
737330-002
737328-001
737474-001
737327-001
737329-001
737326-001
40)