Hard Drive - HP 242 G2 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive connector cable.
These components are included in the Hard Drive Hardware Kit, spare part number 718432-001.
Description
1-TB, 5400-rpm, 2.5-in
750-GB, 5400-rpm, 2.5-in
500-GB, 7200-rpm, 9.5-mm
500-GB, 7200-rpm, 7.0-mm
500-GB, 5400-rpm, 7.0-mm
320-GB, 5400-rpm, 7.0-mm
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Remove the hard drive:
1. Loosen the Phillips PM2.5×4.5 captive screw (1) that secures the hard drive service cover to the
computer.
2. Lift the rear edge of the hard drive service cover (2) and swing it up and forward until it disengages from
the computer.
34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 33).
Spare part number
676521-001
634250-001
678101-001
703267-001
683802-001
645193-005