Avaya 9650 User Manual page 48

Using the contacts feature
4. Select the next field.
5. Enter the number.
6. Select the next field.
7. Select the type of number entered (general, work, mobile, home).
8. Press Primary if applicable.
9. If you have another number for this contact, select the next field and repeat from
10. Press Save or OK.
®
48 Avaya one-X Deskphone Edition for 9650 and 9650C IP Telephone User Guide
• Press the number key that corresponds to the letter or number you want to
enter until the letter or number is displayed.
• If the characters are on the same key, pause before entering the next
character.
• To enter a space, press 0.
• Enter remaining letters or numbers.
• To delete the last character, press the Bksp softkey.
Note:
If you want to remove a letter, number, space, or symbol that is in the middle
of the text you entered, use the left and right navigation arrows to place your
cursor after the character you want to remove. Once your cursor is in the
correct position, press the Bksp softkey to remove the character to the left
of the cursor.
• Press More > Abc to change between upper and lower case letters or to enter
numbers.
• Press ABC again to cycle through the options (Abc/123/abc/ABC) until the type
you want to use is displayed.
• Press More > Symbols to enter characters that are not on your dialpad.
• Select the symbol you want to use.
• Press OK to select the symbol.
• Press Clear to delete all text and start over.
The primary number is the one that will always display without having to go into
contact details.
step 5.
You can add up to two additional numbers for this contact, but you can designate
only one number as primary.
Comments? infodev@avaya.com
March 2012