When The Dialled Line Is Busy Or There Is No Answer - Panasonic KX-NS700 User Manual

1.2.4 When the Dialled Line is Busy or There is No Answer

To clear message waiting indications left on your extension
PT/SLT/PS/SIP Extn.
Off-hook.
•
The Message button light or Message/Ringer Lamp shows the current status as follows:
Off: No message
Red on: You have a message.
•
The display shows the messages starting with the most recent call.
•
At a called extension, the MESSAGE button allows you to clear message waiting indications
if you do not want to call the callers back. To clear, press the MESSAGE button and then
press the soft button. This operation cannot be performed using KX-UT series SIP phones.
•
On your PT, you can establish one or more Message for Another Extension buttons. These
buttons can accept the message waiting notification of other extensions or various incoming
call distribution groups.
In other words, you can monitor the message waiting notifications of other telephones.
•
A single line telephone extension user will receive a special dial tone as message waiting
notification when going off-hook.
•
The message waiting lamp of a single line telephone can also let you know that you have a
message in the same way as the Message button.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Message button or Message for Another Extension button.
Joining an Existing Call (Executive Busy Override)
The preprogrammed extension can call someone who is busy on the telephone and establish a three-party
conversation. After pressing a DSS button, you can check the caller information of the call to another extension
on the display before establishing a three-party conversation.
46 User Manual
7 0
Enter 70. Enter 0.
your
0
extension no.
Dial your
extension number.
C.Tone
On-hook.