Panasonic KX-NS700 User Manual page 15

Button
Direct Station Selection
(DSS)
One-touch Dialling
Incoming Call Distribution
Group (ICD Group)
Message
Message for Another
Extension
Call Forwarding (FWD)/Do
Not Disturb (DND)—Both
calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Group FWD—Both calls
Group FWD—Outside calls
Group FWD—Intercom calls
Account
Conference
Terminate
External Feature Access
(EFA)
Call Charge Reference
Call Park
Call Park (Automatic Park
Zone)
Call Log
Call Log for ICD Group
Log-in/Log-out
Log-in/Log-out of a specified
group
Used to access an extension with one touch.
It is also possible to be changed to the other feature button.
For KX-UT series SIP phones (except KX-UT113/KX-UT123), unlike a
One-Touch button, this type of button cannot be used to dial feature
numbers.
Used to access a desired party or system feature with one touch.
Used to access a specified incoming call distribution group for making or
receiving calls.
Used to leave a message waiting indication or call back the party who left
the message waiting indication.
Used to have a Message button for another extension.
Used to forward all calls to a specified destination or refuse.
Used to forward outside calls to a specified destination or refuse.
Used to forward intercom calls to a specified destination or refuse.
Used to forward all the calls to your group to a specified destination.
Used to forward the outside calls to your group to a specified destination.
Used to forward the intercom calls to your group to a specified destination.
Used to enter an account code.
Used to establish a multiple party conversation.
Used to disconnect the current call and make another call without hanging
up.
Used to access special features offered by a host PBX or a telephone
company.
Used to check the total call charge for your own extension.
Used to park or retrieve a call in a preset parking zone.
Used to park a call in an idle parking zone automatically.
For KX-UT series SIP phones (except KX-UT113/KX-UT123), pressing
this button selects an idle parking zone from among the Call Park (preset
parking zone) buttons configured on the phone. Set both the Call Park
(Automatic Park Zone) button and the Call Park (Preset Parking Zone)
button.
Used to show the incoming call information.
Used to have a Call Log button for incoming call distribution group.
Used to switch between the log-in and log-out mode.
Used to have a Log-in/Log-out button for another incoming call distribution
group.
1.1.5 Before Operating the Telephones
Feature
User Manual 27