Panasonic KX-NS700 User Manual page 281

Button
Log-in/Log-out of a
specified group
Log-in/Log-out for all
groups
Hurry-up
Wrap-up
System Alarm
Time Service (Day/Night/
Lunch/Break)
Answer
Release
Toll Restriction/Call Barring
ISDN Service
Calling Line Identification
Restriction (CLIR)
Connected Line
Identification Restriction
(COLR)
ISDN-Hold
Headset
Time Service Switching
Mode (Automatic/Manual)
Select Log-in/Log-out from Type.
Then select Incoming Group from Parameter Selection.
And, enter the Incoming call distribution group extension number in
Extension Number.
Select Log-in/Log-out from Type.
Then select All from Parameter Selection.
Select Hurry-up from Type.
Then enter the incoming call distribution group extension number in
Extension Number.
Select Wrap-up from Type.
Select System Alarm from Type.
Select Time Service from Type.
Then in Parameter Selection, select which time modes will be switched
manually.
In Optional Parameter (Ringing Tone Type Number), select the Time
Table (tenant number) to be used for changing time modes in Automatic
Switching mode.
Select Answer from Type.
Select Release from Type.
Select TRS Level Change from Type.
Then select the Toll Restriction/Call Barring Level (1–7) from Parameter
Selection.
Select ISDN Service from Type.
Then enter the desired number in Dial (max. 32 digits consisting of 0–9,
#, T [Transfer], [ ] [Secret], P [Pause], and F [Flash]).
Note
Availability of this button depends on the ISDN service of your telephone
company.
Refer to "1.2.5 Accessing the ISDN Service (ISDN Service Access)".
Select CLIR from Type.
Select COLR from Type.
Select ISDN Hold from Type.
Select Headset from Type.
Select Time Service - Automatic/Manual from Type.
Then in Parameter Selection, select the Time Table (tenant number) to be
used when Time Service Switching Mode is set to Automatic.
3.2.1 User Programming
Steps
,
User Manual 345