Panasonic KX-NS700 User Manual page 7

To establish a conference call
KX-UT series
During a conversation
C.Tone
Press CONFERENCE.
Seize an outside line before
dialling an outside phone number.
To set/cancel Call Forwarding
PT/SLT/PS/SIP Extn.
Off-hook. Enter
destination
extension no.
OR
outside line
access no.
(max. 32 digits)
Enter destination extension number.
Or enter outside line access number
and then outside phone number.
For non-KX-UT series SIP phone users
a.
The following features are available for SIP phone users:
–
Making calls
–
Answering calls
–
Holding calls
–
Transferring calls (You cannot go on-hook before the transferred party answers.)
b.
The available operations using feature numbers are limited. Refer to the telephone types displayed at the
top left of each operation.
c.
The tones listed in "5.4.1 What is This Tone?" are not available for SIP phone users. Tones or the tone
types may vary depending on the type of telephone being used. For example, when you put a call on hold,
a specific tone for the SIP phone may be heard, or no tone may be heard.
d.
Any number pressed while hearing a Busy/DND/Reorder tone, such as the feature number to activate
Automatic Callback Busy, will be ignored.
e.
The operations for SIP phones may differ from the steps in this manual, and may vary depending on the
type of telephone being used.
desired
phone no.
Dial desired phone Talk to the
new party.
number.
Both Calls
0
OR
7 1 Outside Calls
1
OR
Intercom Calls
2
71. Enter 0 to 2 as
you desire.
outside
C.Tone
phone no.
Enter #.
C.Tone
Press CONFERENCE. Talk with multiple
parties.
For KX-UT670:
Press Conference Start.
Cancel
0
All Calls
2
Busy
3
No Answer
4
Busy/No Answer
5
Enter required
number.
For "Cancel", go on-hook
directly after entering 0.
On-hook.
Feature Highlights
For KX-UT series:
Press ENTER.
After entering 0 for "Cancel",
for KX-UT series:
Press ENTER.
Go on-hook
For KX-UT series:
Press ENTER.
For KX-UT series:
max. 26 digits
User Manual 7