Networking Ethernet Cp - Siemens S7-300 Configuration Manual

Configuring the Ethernet CP with STEP 7
3.2 Configuring - follow the steps below
3.2.2

Networking Ethernet CP

Procedure
By installing and assigning the Ethernet CP in the rack of a SIMATIC station, you establish
the logical connection between the Ethernet CP and the subnet.
1. In your project, select the station you want to connect via the Ethernet CP.
2. Place the CP in the S7 station like any other module by selecting it from the hardware
catalog.
You can select CPs from the catalog based on a brief descriptive text and the order
number.
Result: The CP is assigned to the SIMATIC station.
40
Configuring and commissioning S7 CPs for Industrial Ethernet
Configuration Manual, 09/2013, C79000-G8976-C182-13