Siemens S7-300 Configuration Manual page 4

This manual...
New in this release
Editorial revisions
Note
You should also read the history of this manual in the appendix in Chapter Document history
(Page 241).
Replaced documentation
This manual replaces the manual release 10/2012.
Abbreviations / short forms
The following abbreviations or short forms for CP groups are used in this manual:
● "Advanced CP"
The term "Advanced CP" stands for CP modules with e-mail, FTP or Web functions and
PROFINET CBA. The term "Advanced" is used in the product name of the relevant
modules (for example CP 343–1 Advanced).
● "Security CP"
In the context of the description of CP modules, the term "security CP" means CPs with
integrated Industrial Ethernet security functionality (CP x43–1 Advanced as of V3.0).
The documentation for SIMATIC NET S7 CPs
The documentation for SIMATIC NET S7 CPs consists of the following parts:
● Manual Part A - Configuration manual "Configuring and Commissioning S7 CPs for
PROFIBUS" (this document)
● Manual Part B - "S7-CPs for Industrial Ethernet - CPxxx"
Refer to /1/ (Page 227).
● SIMATIC NET Industrial Ethernet Security – Basics and Application - configuration
manual
Refer to /16/ (Page 232).
● Program blocks for SIMATIC NET S7 CPs - programming manual
Refer to /10/ (Page 230).
Contains the detailed description of the program blocks for the following services:
– Open communications services
– Access coordination with FETCH/WRITE
– Connection and system diagnostics
– FTP services
– Programmed connections and IP configuration
4
Configuring and commissioning S7 CPs for Industrial Ethernet
Configuration Manual, 09/2013, C79000-G8976-C182-13