Recording A Memo Message - Panasonic KX-TG6500 Operating Instructions Manual

Erasing Messages
Handset
1
Press the soft key (
2
Press [*][5] to erase all messages. Wait until "No messages" is heard.
• While erasing messages, alarm tones will be heard.
• All messages for the line(s) and memo messages are erased.
• To end remote operation, press [OFF].
• Information in the Caller List will not be erased. To erase caller information, see
page 46.
To erase all messages for the desired line(s)
1. Press the soft key (
2. Select the line(s) by pressing [#][1] (LINE 1), [#][2] (LINE 2) or [#][0]
(LINE 1 and LINE 2).
3. Press [*][5] to erase all messages for the line(s). Wait until "No
messages" is heard.
• While erasing messages, alarm tones will be heard.
• All messages for the line(s) are erased. Memo messages are not erased.
• To end remote operation, press [OFF].

Recording a Memo Message

Base Unit
You can record a voice memo message of up to 3 minutes for other users or
yourself.
1
Press [MEMO].
2
After the long beep, talk clearly 20 cm (8 inches) away from the MIC.
• The base unit display shows the elapsed recording time.
• If the elapsed recording time exceeds 99 seconds, the counter continues
from 00 to indicate 100 seconds.
3
When finished, press [MEMO] or [STOP].
• The NEW MESSAGE indicator flashes.
• If you record for over 3 minutes in step 2, the unit will stop recording.
• If " " is displayed, 6 beeps sound and "Your message was not recorded. Record your
message again." is announced, start again from step 1.
78
, then press the soft key (
)
SEARCH
, then press the soft key (
)
SEARCH
).
PLAY
).
PLAY