Table of Contents
Advertisement
KX-TCD961EB.4(38~46)
99.9.27 7:33 PM
Erasing Messages
The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New
messages cannot be recorded when:
— "Memory is full" is heard.
— The number of messages displayed on the base unit flashes rapidly.
— The ANSWER ON indicator flashes rapidly.
Erase some or all of the messages. We recommend you erase unnecessary messages after each
playback.
Erasing a specific message
Press
while the message you want
ERASE
to erase is being played.
The unit erases the message.
A short beep will sound and the unit will
continue to play the next message.
Recording a Memo Message
You can record a personal message in memory.
1
Press
.
A long beep sounds.
2
After the beep, talk clearly, about 20 cm
away from the MIC.
The base unit display shows the elapsed
recording time.
40
Page 40
Erasing all messages
All recorded messages, except the greeting
message, can be erased at one time.
1
Press
ERASE
.
"Press ERASE button again to erase all
messages." is heard.
2
Within 5 seconds, press
A long beep sounds and "No message" is
heard.
The base unit display shows
3
When finished, press
A beep sounds.
ERASE
again.
"0".
.
Advertisement
Table of Contents
