Auto Talk
Handset
The Auto Talk feature allows you to answer calls by simply lifting the handset off the
base unit or charger (for KX-TG6502 or accessory handset users, p. 3). You do not
need to press [C] or [s]. The factory preset is OFF.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Auto talk" by pressing [d] or
[B], then press the soft key (
4
Select "On" or "Off" by pressing [d] or [B].
5
Press the soft key (
• In order to view Caller ID information after you lift the handset to answer a call,
leave the Auto Talk feature turned off.
• If you change the line selection feature from "Auto" to "Line 1" or "Line 2" (p. 69),
the Auto Talk feature will function for that line only. If the other line receives a call,
the Auto Talk feature will not function.
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is "level 3".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "LCD contrast" by pressing [d] or
[B], then press the soft key (
4
Select the desired contrast by pressing [d]
or [B].
• The contrast will change.
• The number of steps indicates the contrast level.
5
Press the soft key (
For assistance, please call: 1-800-211-PANA(7262)
SELECT
), then press [OFF].
SAVE
Handset
SELECT
), then press [OFF].
SAVE
Programmable Settings
Initial setting
).
SELECT
Auto talk
).
Auto talk
:Off
Initial setting
).
SELECT
LCD contrast
).
Ex. Level 3
LCD contrast
Low
High
23