Panasonic KX-TG6500 Operating Instructions Manual page 35

To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed are stored in the redial list.
1. Press [REDIAL/PAUSE].
• The last number dialed is displayed.
2. Scroll to the desired number by pressing [d] or [B].
• You can also scroll down through the list by pressing [REDIAL/PAUSE].
• To exit the list, press [OFF].
3. Press [C], [s], or a line soft key (
• To erase an item, scroll to the item then press the soft key (
• If "No items stored" is displayed, the list is empty.
To put a call on hold
1. Press [HOLD/INTERCOM] during a conversation.
• " " or "
LINE1 LINE2
• "Press extension# to transfer" is displayed.
• To transfer the call to the base unit or another handset, see page 58;
to transfer to the Answering System, see page 79.
2. Press [HOLD/INTERCOM] again.
• "Hold" and the line are displayed.
To return to the call, press the line soft key (
flashing.
• The base unit user can also take the call by pressing the line button that is
flashing.
• Another handset user can also take the call by pressing the line soft key (
or ( ).
LINE2
• If another phone is connected on the same line (p. 12), you can also take the call
by lifting its handset.
• If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the
Ringer/Message Alert indicator will start to flash rapidly. After 4 additional minutes
on hold, the call will be disconnected.
Backlit LCD display/Lighted handset keypad
The handset display and dialing buttons will light for a few seconds after pressing a
button or lifting the handset off the base unit or charger (for KX-TG6502 or
accessory handset users, p. 3). They will also light when an intercom/outside call is
being received.
For assistance, please call: 1-800-211-PANA(7262)
LINE1
" flashes with the line status icon (
Making Calls
) or ( ).
LINE2
ERASE
or
L1 L2
Ex. LINE1 on hold.
S P
L1
Hold Line1
LINE1
) or (
LINE1 LINE2
).
).
PRIVACY1
[1]
LINE2 SEARCH
) that is
)
LINE1
35