Installation; Connecting The Ac Adaptor - Panasonic KX-TG6500 Operating Instructions Manual

Installation

Connecting the AC Adaptor

Base unit
Raise the antennas.
• Base unit: USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z).
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
• If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID services.
• This unit will not function during a power failure. We recommend connecting a
standard telephone to the same telephone line or to the same telephone jack
using the Panasonic KX-J66 T-adaptor, or using the Panasonic Battery Back-Up
Power Supply KX-TCA200.
Charger unit (KX-TG6502 only)
• Charger unit: USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No.
KX-TCA1-G).
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
12
Fasten the AC adaptor cord.
Bottom of the base unit
Power Outlet (AC 120 V, 60 Hz)
AC Adaptor
for Base Unit
AC Adaptor
Hook
Power Outlet
(AC 120 V, 60 Hz)