Line Mode - Panasonic KX-TG6500 Operating Instructions Manual

Programmable Settings

Line Mode

The line mode for both lines is preset to "B" and generally should not be adjusted. If
the line buttons on the base unit do not light properly, or the line status icons (
and ) are not displayed on the handset properly, the line mode selection is
L2
incorrect. Set line mode to "A". Each line has its own setting.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Set tel line" by pressing [d] or
[B], then press the soft key (
4
Scroll to "Set line mode" by pressing [d]
or [B], then press the soft key (
5
Press [d] (Line1) or [B] (Line2) to select
the line.
6
Select "A" or "B" by pressing [d] or [B].
7
Press the soft key (
• To select the other line, repeat from step 4.
8
Press [OFF].
22
Handset
)
SAVE
).
SELECT
).
SELECT
).
SELECT
Initial setting
Set tel line
Set line mode
Set line mode
=Line1 =Line2
B
d
Set line mode
Line1:B
L1