Filter Assembly; Blower Housing; Back Cover - Kenmore 795.851**.900 Service Manual

FILTER ASSEMBLY

BLOWER HOUSING

BACK COVER

1.
Remove the filter.
2.
Remove 3 screws.
3.
Remove the Cover Grid.
4.
Disconnect the electrode sensor.
1.
Disassemble the top plate.
2.
Remove the Cabinet Cover and Tub Drum [Front].
3.
Remove the Drum assembly.
4.
Remove 2 screws and cover (Air guide).
5.
Remove the bolt and washer.
6.
Remove the fan.
7.
Disconnect the motor clamp and motor.
1.
Disassemble the top plate.
2.
Remove the Cabinet Cover and Tub Drum [Front].
3.
Remove the Drum assembly.
4.
Remove 7 screws.
5.
Remove the Back Cover.
47