Kenmore 795.851**.900 Service Manual page 8

Stacking Kit Installation Instructions
To ensure safe and secure installation, please observe the instructions below.
W W A A R R N N I I N N G G
Do not attempt this alone!
At least two people are required to lift and
position the dryer on top of a washing
machine!
Failure to heed this warning can result in
serious physical injury and damage to the
appliance.
Place the washer firmly on a stable, even
and solid floor as product installation
instructions describe in the owner's
manual.
Peel the protective paper from the tape on
the side bracket.
Fit the side bracket firmly to the side of the
top plate by attaching the double-faced tape
to the top plate as picture shown.
Stacking kit
Secure the side bracket to the washer with
a screw on the back of the bracket. Repeat
Steps 2, 3, & 4 for the other side.
Place the dryer on top of the washer by
placing the legs as shown. Be careful not to
pinch fingers between the washer and dryer.
Slide the dryer back against the stop on the
side rail.
Insert the front rail of the stacking kit. Push
the front rail back against the stops on the
side brackets.
Screw both sides of the front rail to the side
brackets.
• Do not use a stacking kit with a gas dryer in
potentially unstable conditions like a mobile
7
home.