Customizing The Buttons - Panasonic KX-TDE100 Operating Manual

3.1.4

Customizing the Buttons

You can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons.
• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
• The buttons in the table below can only be set on certain flexible buttons, as follows:
– Flexible buttons on PTs/Add-on Key Modules/PSs: all buttons can be set.
– Flexible buttons on DSS Consoles: all buttons except CTI and Primary Directory Number
(PDN) buttons can be set.
– Programmable feature (PF) buttons: only the One-touch Dialing button can be set.
To enter the program mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Button
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
Direct Station Selection (DSS)
One-touch Dialing* 1
Incoming Call Distribution Group (ICD
Group)
Message
Message for Another Extension
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
To program
To continue
programming
input
Follow
Press desired
programming
flexible button.
input.
#
+ CO line group no. (2 digits)
0
+ CO line no. (3 digits)
1
+ Extension no.
*²
2
+ Desired no. (max. 32 digits)
3 0
+ Incoming call distribution group extension no. (+
+ delayed ringing time [0–7])*
4 0
4 0
+ Extension no./Incoming call distribution group
extension no.
4 1
4 2
4 3
3.1 Personal Programming
To exit
PROGRAM
OR
PAUSE
OR
AUTO DIAL
STORE
Press PROGRAM
Press ENTER
or PAUSE.
or STORE.
Programming Input
3
#
Operating Manual 175