4.1 Troubleshooting
4.1
Troubleshooting
4.1.1
Troubleshooting
Troubleshooting
Problem
The telephone does not work properly.
I cannot use the telephone.
Some features do not work.
Even though following the manual
instructions, none of the operations
work when using a proprietary
telephone.
The paralleled single line telephones do
not ring.
The telephone does not work using the
personal settings or with other settings.
(One-touch dialing, forwarding
destination, etc.)
My proprietary telephone does not have
a feature button.
152
User Manual
Remedy
•
Consult your dealer.
•
The telephone is locked.
Unlock your telephone. (
Lock, 2.1.1 Extension Control)
•
Your telephone is connected to an eXtra Device
Port.
System programming is required. Consult your
dealer.
•
System management may restrict certain features.
Consult your manager.
•
The feature numbers have changed.
Confirm the revised number and try again.
•
The Intercom line was not seized. The seized line,
when going off-hook, was changed by personal
setting. (
3.1.2 Settings on the Programming
Mode)
In the manual, going off-hook means an Intercom
line is seized.
If the setting has been changed, press the INTERCOM
button after going off-hook and follow the instructions.
•
"No ring" may be selected.
Change the setting to ring. (
Telephone)
•
The extension line has been changed. The previous
telephone's settings have not been cleared.
Clear the settings and then program your desired
settings again. (
3.1.1 Personal Programming, 3.1.3 Customizing the
Buttons)
•
Some models do not have the feature button.
Change a flexible button to the desired button.
(
3.1.3 Customizing the Buttons)
Enter the specified feature number instead of the
feature button. (
Telephones)
1.5.3 Extension
1.7.10 Paralleled
1.7.12 Extension Feature Clear,
1.1.1 Before Operating the