Customized Buttons - Panasonic KX-TDA100 User Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100:
Table of Contents

Advertisement

1.1 Before Operating the Telephones
PROGRAM:
PROGRAM
Used to enter and exit the Programming
mode.
RELEASE:
RELEASE
Used to disconnect the line.
Programmable Feature (PF):
Located on the upper part of the CO
(PF)
button array or on the DSS Console.
Assigns the desired button and used to
access the stored feature. Mostly used as
a One-touch Dialing button. (Only the "F
and number" may be shown on some
telephones.)
SELECT:
Used to select the displayed item or to call
SELECT
the displayed phone number.
ENTER:
Used to confirm the selected item.

Customized Buttons

If the term is in parentheses like (Account) in this section, it means a flexible button has been made into an
"Account" button. To customize, refer to "3.1.3 Customizing the Buttons".
Buttons
Loop-CO (L-CO)
Group-CO (G-CO)
18
User Manual
Used to access an idle CO line for making outside calls.
Incoming outside calls from any CO line arrive at this button.
Used to access an idle CO line in a specified CO line group for making outside
calls.
Incoming calls from CO lines in the assigned CO line group arrive at this button.
ANSWER:
ANSWER
Used to answer an incoming call.
Navigator Key/Jog Dial/Volume Key:
Used to adjust the volume and the display
contrast or select desired items.
VOL
MODE:
Used to shift the display to access various
MODE
features.
SHIFT:
Used to access the second level of Soft
SHIFT
button features.
CANCEL:
Used to cancel the selected item.
Feature

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200

Table of Contents