System Settings - Siemens simatic hmi op7 Equipment Manual

System Settings

In this chapter
10.1 Selecting a Language
Languages
available
Procedure
Equipment Manual OP7, OP17
Release 04/99
This chapter informs you of functions that can be triggered by standard
screens to perform system settings. They include:
Selecting a language,
Modifying parameters for OP interfaces, printers, message display, date
and time,
Adjusting display contrast,
Setting OP mode.
The configuration can be loaded on the OP in up to three languages simulta-
neously. You can switch between the separate languages online at any time.
After switching over, all language-dependent text is displayed in the new
language. The following languages are available for OP7 and OP17:
German
English
French
Italian
Spanish
Russian (Cyrillic characters)
To choose another language, proceed as follows:
Step
1 Choose the standard screen System settings
2 Select the language you require by means of a symbolic input.
The selection list contains only the languages which have been
loaded on the OP.
The OP performs a cold restart and loads all elements of lan-
guage-dependent text in the new language.
Procedure
Language.
10
10-1