Siemens simatic hmi op7 Equipment Manual page 172

Documentation
Communication for
Windows-based Systems
User's Manual
Other PLCs
Online Help
ProAgent for OP
User's Manual
E-4
Target Group Content
Programmers Provides information on connecting Windows-based systems
to the following PLCs:
SIMATIC S5
SIMATIC S7
SIMATIC 505
Allen Bradley PLC 5/SLC 500
This documentation describes the
configuration and parameters required for connecting
devices to the PLC and the network
user data areas used for exchanging data between operat-
ing unit and PLC.
Programmers Provides information on connecting devices to PLCs, such
as:
Mitsubishi
Allen Bradley
Telemecanique
Modicon
Omron
SIMATIC WinAC
When the drives are installed, the relevant Online Help is
installed at the same time.
Configurers Provides the following information about the ProAgent op-
tional package (process diagnosis) for OPs
configuring system-specific process diagnosis
detecting, locating the cause of and eliminating process
errors,
customizing standard diagnostic screens supplied with
the software.
Equipment Manual OP7, OP17
Release 04/99