Siemens simatic hmi op7 Equipment Manual page 86

9.1 FORCE VAR
9-2
You call FORCE VAR by means of the standard screen ForceVAR. Following
the call, the operand list is displayed. Depending on the display, an operand is
displayed on either one or two lines.
Figure 9-1 shows the display for the SIMATIC S5 on the OP17 (8 x 40 repre-
sentation). Figure 9-2 shows the display for the SIMATIC S7/M7 on the OP7.
DB34 ADR122 KM = 00010010
T 1 KT = 3.4 s
Figure 9-1 Display of PLC Operands for SIMATIC S5 (OP17, 8x40 representation)
Operand field
DB34 ADRxx
INT = 999
Format field Value field
Figure 9-2 Display of PLC Operands for SIMATIC S7/M7 (4x20 representation)
*
00110100
Value field
Updating in progress
Format field
Numbers field
Operand field
*
Updating in progress
Equipment Manual OP7, OP17
Release 04/99