Disconnecting The Ups Internal Batteries - IBM 11000 VA LCD 5U Installation And Maintenance Manual

Disconnecting the UPS internal batteries

To disconnect the UPS internal batteries, complete the following steps:
1. Remove the UPS lower front bezel. Press the two side latches toward each
2. Loosen the thumbscrew on the left battery retention bracket 1 , slide the
22
11000 VA UPS and 11000 VA EBM: Installation and Maintenance Guide
other to release the bezel, and pull the bezel away.
bracket to the right 2 , rotate the bracket out 3 , and then remove it.
L