● Code :
U3-3611
U3-3613
U3-3614
● Symptom / Cause:
Jam has occurred inside the DADF unit.
● Troubleshooting method:
1. Open DADF cover. If there is jammed paper, remov
2. If this error occurs continually, check the following:
a) Check if Exit actuator(JC66-03184A) operates
b) Check if the exit sensor cable is connected corre
c) If the problem persists, replace Exit sensor(0604
c) If the problem persists replace Exit sensor(0604
Service Manual
7. Troubles
● Error message :
Original paper jam in exit
shooting
area of scanner
ve it.
normally.
ectly.
4-001393).
4 001393)
7-U
-15
SAMSUNG ELECTRONICS