2.10.3.4 DADF Exit Drive Assembly
GEAR-EXIT
LINK-EXIT_IDLE
The power from the Motor is transferred to GEAR-EXIT and ROLER-EXIT. The paper is transferred to the
exit. At duplex mode, counter rotation occurs.
To keep the pressure of the Exit Roller, the ROLLER-EXIT_IDLE is pressurized by spring. At duplex mode,
when it is rotated inversely, it make the space between rollers to protect the jam.
The space between rollers is adjusted by LINK-EXIT_IDLE and SENSOR-EXIT_IDLE.
Service Manual
2. Product Description
ROLLER-EXIT
SHAFT-EXIT_IDLE
HOLDER-EXIT_IDLE F/R
ROLLER-EXIT_IDLE
2-59
PULLEY-FEED
SAMSUNG ELECTRONICS