Fuser Unit - Samsung SCX-82x0 series Service Manual

3.5 Fuser unit

3 5 F
This section contains the procedures for disassembling
Perform the following procedure to remove the Align se
Caution
The temperature gets high in the vicinity of the fuser u
replacing it, make sure that fuser unit has cooled..
Service Manual
3.Replacemen
i
nt Procedure
g the components of the printer Fuser Unit.
et from the Scan Unit.
nit. When replacing it, you may get burned. Before
1. Open Side-cover.
2. Remove 4 screws from the left/right.
3. Remove the fuser unit by holding the
handles [A].
3-2 21
SAMSUNG ELECTRONICS