Samsung SCX-82x0 series Service Manual page 303

● C d ● Code :
C6-1311
● Symptom / Cause: y p
Fuser unit is not installed correctly.
Fuser unit is not connected properly.
● Troubleshooting method:
1. TuRn the machine off then on.
2. Re-install Fuser unit.
3. Check the harnesses of Fuser unit is connecte
3. If the problem persists, replace
(Refer to 3.5 Fuser unit) (Refer to 3 5 Fuser unit)
a. Open Side-cover.
b, Remove 4 screws.
c. Take off Fuser unit and replace it.
Service Manual
7. Troubles shooting
● 에러 메시지 : ● 에러 메시지
Fuser unit is not in nstalled correctly. Install it.
ed correctly.
Fuser(JC91-01 1144A(220V), JC91-01143A(110V))
7-C -12
.
SAMSUNG ELECTRONICS