3.12 Pick-up drive unit
This section contains the procedures for disassemblin
Perform the following procedure to remove the Pick-up
1. Remove the SMPS box.
2. After removing 1 screws, disassemble the cover cas
2. After removing 1 screws, disassemble the cover cas
3. Remove Pickup Drive Unit after removing 4 screws
Service Manual
3.Replacemen
nt Procedure
g the Pick-up Drive Unit components of the printer.
p Drive Unit.
ssette rail.
ssette rail.
and all connectors
3-5
56
SAMSUNG ELECTRONICS