Samsung SCX-82x0 series Service Manual page 289

● Error code :
A3-2210
● Symptom / Cause :
CTD sensor is defective.
● Troubleshooting method :
1. Check if the Imaging unit motor works properly. If th
motor(JC93-00123B).
(Refer to 3.8.1 Main drive motor)
2. Check the TC value by SVC mode.
(Diagnostics > Engine Diagnostics > Engine Tes
3. If the TC value is between 80 to 120, replace Imagi
Service Manual
7. Troubles shooting
● Error message :
Sensor Failure: Turn n off then on. Call for service if the problem persists.
e motor is defective, replace Main drive
st Routines > 111-5030)
ing unit(MLT-R607K).
7-A- -11
SAMSUNG ELECTRONICS