Smps Fan - Samsung SCX-82x0 series Service Manual

3.7.8 SMPS Fan

Perform the following procedure to remove the SMPS
1. Remove Rear cover.
2. After removing 6 screws, take off SMPS 2 Aft i
Shield.
3. Pull out a connector on SMPS.
4. After removing a screws, take off the SMPS
fan.
Caution Caution
Not to change the assembly direction of fan.
Service Manual
3.Replacemen
6 t k ff SMPS
nt Procedure
Fan from the printer.
3-4 44
SAMSUNG ELECTRONICS